วันอาทิตย์ที่ 19 กรกฎาคม พ.ศ. 2552

Custom LeatherCraft 1528 23 Pocket Large Electrical and Maintenance Tool Carrier

Buy Cheap Custom LeatherCraft 1528 23 Pocket Large Electrical and Maintenance Tool Carrier


Buy Low Price From Here Now

Tool Bags with Trays Type: Traytote Tool Bag Number of Pockets: 23 Width: 11 Depth: 10 Material: Denier Polyester
Readmore

Technical Details

- 11-inch by 6-inch Multi-compartment plastic tray included that slides securely into bottom of tool carrier organizes small parts
- 16 Multi-use outside pockets and 7 inside to organize a wide range of tools and accessories
- Box shaped design prevents tipping
- Extra padded carrying handle and adjustable shoulder strap
- Large main divided pockets with elastic loops to accommodate large tools
See more technical details
Customer Buzz
 "Finally Found Exactly What I Was Looking For" 2009-02-10
By John M. Duran (Denver, CO -America-)
I've looked long and hard for a tool bag just the right size and not only enough pockets but the right size and depth. Its perfect for the tools I normally carry plus has room for quite a few more without making it too heavy. The center compartment is of sufficient size to put electrical fittings, devices and boxes cutting down on multiple trips to the service van. I hope to have this bag for a long time but when that time comes that it does wear out, I would get exactly the same one next time too.

Customer Buzz
 "Handyman's Handybag" 2009-01-28
By Jim Weigand (Sioux Falls S.D,)
I have used the smaller version of this for years and decided to consolidate Two of them into this larger one, worked well. A little harder to carry because of added size and weight, but nice to have all tools in one bag. I am an A/V installer and can't think of a better tool carrier for my trade or any that needs organized, clean tool storage.

Customer Buzz
 "Excellent Pouch" 2009-01-14
By Marshall Douglas (Florida)
I should of bought this a long time ago. Been using it for a few months now and love. Durable and compact.

Customer Buzz
 "nice bag" 2008-12-14
By Roger Hirsch (Dundee, OR United States)
I'm a contractor operating out of a VW station-wagon, so the small footprint is nice. The only change I'd make is to have a couple of longer sections in the slide-out box. (I store my spade bits in one chamber). I solved the problem by just sawing out a couple of the dividers myself. There is also just enough space in the box pocket (along side the box) for my Dewalt reciprocating saw blade case.

Customer Buzz
 "Great tool bag for HVAC - kind of too big for other trades" 2008-11-10
By Paulo Demello (Florida, USA)
As the title says it is a great bag for HVAC guys. The guy that I work with has one and I see it can take some abuse on the job site. Big enough to carry all tools you need in one trip (including a small drill) and great tray under the bag for some small supplies.



Buy it and be a happy camper, or a happy tech.


Images Product

Buy Custom LeatherCraft 1528 23 Pocket Large Electrical and Maintenance Tool Carrier Now

วันเสาร์ที่ 18 กรกฎาคม พ.ศ. 2552

CLC Keystone Series 1514 BlackBerry Holder

Buy Cheap CLC Keystone Series 1514 BlackBerry Holder


Buy Low Price From Here Now


Readmore

Technical Details

- BlackBerry holder
- Belt clip swivels to accommodate wearing on left or right side
- Magnetic shut off feature
See more technical details

Images Product

Buy CLC Keystone Series 1514 BlackBerry Holder Now

วันพฤหัสบดีที่ 26 มีนาคม พ.ศ. 2552

Back To Basics AppleIf you complain it leaves a lot of skin on your apples.. adjust it.

Its the typical ol' apple peeler. Uses a slightly different peeler than they did 150 years ago. But it works just as well.
I thought too that it must be crappy (i got mine at the goodwill) but I adjusted the set screw to allow greater arm movement and it works like a charm. Peels most potatoes (of course leaves the ends, as its not designed for potatoes.
Its a bit wasteful compared to some, but not as bad as me when I peel apples or potatoes.

I fear the slicer/corer piece will bend sooner or later, its just a flat piece of steel bolted on the end with no real support and only 1 wingnut. I may braze something on there if I can figure out a way to do it so as it doesn't interfere. Or just not worry about coring the apples.
Back To Basics Apple

Back To Basics AppleIf you complain it leaves a lot of skin on your apples.. adjust it.

Its the typical ol' apple peeler. Uses a slightly different peeler than they did 150 years ago. But it works just as well.
I thought too that it must be crappy (i got mine at the goodwill) but I adjusted the set screw to allow greater arm movement and it works like a charm. Peels most potatoes (of course leaves the ends, as its not designed for potatoes.
Its a bit wasteful compared to some, but not as bad as me when I peel apples or potatoes.

I fear the slicer/corer piece will bend sooner or later, its just a flat piece of steel bolted on the end with no real support and only 1 wingnut. I may braze something on there if I can figure out a way to do it so as it doesn't interfere. Or just not worry about coring the apples.
Back To Basics Apple

Back To Basics AppleIf you complain it leaves a lot of skin on your apples.. adjust it.

Its the typical ol' apple peeler. Uses a slightly different peeler than they did 150 years ago. But it works just as well.
I thought too that it must be crappy (i got mine at the goodwill) but I adjusted the set screw to allow greater arm movement and it works like a charm. Peels most potatoes (of course leaves the ends, as its not designed for potatoes.
Its a bit wasteful compared to some, but not as bad as me when I peel apples or potatoes.

I fear the slicer/corer piece will bend sooner or later, its just a flat piece of steel bolted on the end with no real support and only 1 wingnut. I may braze something on there if I can figure out a way to do it so as it doesn't interfere. Or just not worry about coring the apples.
Back To Basics Apple

Back To Basics AppleIf you complain it leaves a lot of skin on your apples.. adjust it.

Its the typical ol' apple peeler. Uses a slightly different peeler than they did 150 years ago. But it works just as well.
I thought too that it must be crappy (i got mine at the goodwill) but I adjusted the set screw to allow greater arm movement and it works like a charm. Peels most potatoes (of course leaves the ends, as its not designed for potatoes.
Its a bit wasteful compared to some, but not as bad as me when I peel apples or potatoes.

I fear the slicer/corer piece will bend sooner or later, its just a flat piece of steel bolted on the end with no real support and only 1 wingnut. I may braze something on there if I can figure out a way to do it so as it doesn't interfere. Or just not worry about coring the apples.
Back To Basics Apple

Back To Basics AppleIf you complain it leaves a lot of skin on your apples.. adjust it.

Its the typical ol' apple peeler. Uses a slightly different peeler than they did 150 years ago. But it works just as well.
I thought too that it must be crappy (i got mine at the goodwill) but I adjusted the set screw to allow greater arm movement and it works like a charm. Peels most potatoes (of course leaves the ends, as its not designed for potatoes.
Its a bit wasteful compared to some, but not as bad as me when I peel apples or potatoes.

I fear the slicer/corer piece will bend sooner or later, its just a flat piece of steel bolted on the end with no real support and only 1 wingnut. I may braze something on there if I can figure out a way to do it so as it doesn't interfere. Or just not worry about coring the apples.
Back To Basics Apple